SIA “Vēvers” manufactures and sells window and structural beams.
When producing window frames, both fixed (FIX) and lengthwise grown (FJ) lamellas (preforms) are used, without knots and without defects. The moisture content of the blanks after drying is 12% (+/- 2%). Toothed growth areas are visible on the wide edge of the frame. To ensure high quality of the bonding area, D4 polyurethane-based two-component adhesive is used.
The price of the beams depends on the order volume and the required beam size.
For additional information, contact us at +371 25746346 , e-mail andis@vevers.lv
Lumber and sawn timber: Joint wood / board materials
SIA “Vēvers” produces and sells pine wood panels.
Pine wood boards are grown lengthwise and glued widthwise. For gluing boards, individual lamellas with a width of 24-60 mm are mainly used. After growing, they are planed and after gluing, they are carefully sanded. The moisture content of the blanks after drying is 12% +/- 2%. The growth line is visible on the surface of the board. Glue (D4) is used for growing, which guarantees high quality of the connection.
For additional information, contact us at +371 25746346 , e-mail andis@vevers.lv
Lumber and sawn timber: Roof trusses, rafters, slats, beams, struts
SIA “Vēvers” manufactures and sells theater battens.
Theater battens of various sizes are glued from long-grown, branchless blanks. The surface of the batten is continuous and contains at least one glue seam and its wide edges. The humidity of the blanks after drying is 12% (+/- 2%). After gluing, all surfaces are planed smoothly, and the edges are rounded. A small amount of blueing, resin or cores is allowed for theater battens. The material is resistant to deformation.
For additional information, contact us at +371 25746346 , e-mail andis@vevers.lv
Heating: Wood briquettes
SIA “Vēvers” produces and sells wood chip briquettes.
Woodchip briquettes are a high-quality and energy-efficient 100% natural fuel material that is produced only from pine wood chips without using any additional binders.
WHY CHOOSE TO BUILD WITH BRIQUETTES?
pure, 100% organic product
without binders
made from 100% pine chips
complete combustion, leaving a minimal amount of ash
high heat capacity and high calorific value
uniform heat output
compact and easily transportable material
easy to use
Since chip briquettes are a compact and dense product, their volume is smaller than that of firewood:
1 ton of briquettes takes up approximately 1.2 m3
1 ton of firewood takes up approximately 3.3 m3
TECHNICAL SPECIFICATIONS OF BRICKETS
In cooperation with the Institute of Environmental Protection and Heat Systems of Riga Technical University, briquette analysis was performed in accordance with the standard NE 14961-1:2008.5
Results obtained:
width: 60 mm, length: 15 mm, height 40 – 105 mm,
total moisture content – 7.3 wt% (CEN/TS 14774-3),
For additional information, contact us at +371 25746346 , e-mail andis@vevers.lv
Sawing by-products: Sawdust
SIA “Vēvers” sells wood chips.
During the woodworking process, more than 500 m3 of chips are produced in the workshops every month. They consist of 100% pine material. It is possible to purchase planed chips and sawdust.
For additional information, contact us at +371 25746346 , e-mail andis@vevers.lv
Sawing by-products: Mulch
SIA “Vēvers” sells pine bark mulch, which does not contain any chemical impurities.
Bark mulch can be used effectively in gardening; it improves the soil by increasing air and moisture capacity, and also reduces the growth of weeds in the soil.
Class A: first or second cut (6.10 m first cut only) without branches.
Class 1: 1 branch per 1 m is allowed.
Unacceptable defects
blueness
troupe
insect damage
metallic inclusions
twin core
branchiness
stepson
dry-skinned
mechanical damage
cracks
farewell
Cookies
This website uses the necessary cookies for it to work. With your consent, additional statistical and social media cookies may be used on this website.